What Mounts can be used with the SkyWatcher SkyMax Telescope? With a 5” aperture, you already have the advantage of additional light grasp over a smaller scope even with its optical obstruction that results in some light loss. The Skywatcher Dob 200 is better value, but if you live in a small flat like me and want a dinky little scope that you can hide in a corner, then get a Mak. The SkyMax telescope is a great starter scope for a beginner. The upside is beginners will start off with a quality telescope system that will last them a long time with the ability to grow with the scope and unlock its full potential as skills are learned and additional accessories acquired. Unlike kid’s toys and many beginner scopes that can’t see surface detail on the moon, the SkyMax can with great contrast and no chromatic aberration discernable to the eye. Why have it? 10mm spacings, allowing attachment to a large photo tripod in various
However, viewing planets in detail is often a difficult task to do with a cheap, starter telescope. standard SCT thread, so you could easily swap on a different one. Personally i would go with the Skywatcher 127 Mak . good view of M42. However, the brightest DSOs can be seen, and the Pleiades can fit within the field of view with the right eyepieces. grind away at a piece of glass thats what you get. From what I have read they seem to perform very well. It’s also a great option for an experienced user to buy as a supplementary scope, something they can modify if desired, and it can be placed on a mount/tripod of the owner’s choosing. The Mak-Cass has a primary mirror with a hole in it where the light cone is able to come to a focus point beyond the primary mirror – hence the long 1540 mm focal length and short 15” tube length. Light is focused via the secondary mirror which is a thick meniscus lens with an aluminized spot. Choosing a tripod with an adjustable length can retract to provide for an even more mobile setup and combined with a mount, it will add additional weight to the entire telescope system. It’s priced higher than most “budget” telescopes designed for beginners, it lacks a tripod and mount in the buy, and no instructions are available at this time. What else is there to know about the SkyWatcher telescope? Select Your … Fortunately, it has SCT threading, so the visual back can be replaced with a different one or a 1.25” one to accept 1.25” accessories. And don't be put off buying used. The resolution and overall view, Surprisingly good views of Mars are to be had with
The SkyMax’s long focal length will mean compromises when using a DSLR camera for astrophotography. ... Skymax 127 review … little, build and optical quality are first rate. What Size Accessories works with the Visual Back on the SkyMax 127? with accessories, but it uses a large 5” lens system to do the job of gathering light so you can … However, you may come to find that it weighs more than it looks. on the one hand whilst on the other. Even so, portability and setup and disassembly ease will not be compromised. The payload capacity of the mount should be a point of detail as you don’t want to exceed 75% of the payload when loading the OTA with additional accessories like cameras and heavy eyepieces. for ages and had been trying out various models that didnt quite work: poor
Inexpensive,
optics, not enough aperture, too large, too heavy; always something not quite
It’s always recommended that beginners start with observing the moon and then move on to planets.